The following article is about yet another Arduino library that I have written. AnyRtttl is a feature rich arduino library for playing RTTTL melodies. The library offers much more interesting features than relying on the widely available void play_rtttl(char *p) function. The AnyRtttl is a feature rich library which supports all best RTTTL features.
Keep reading AnyRtttl – A feature rich arduino library for playing RTTTL melodies ?
Please note that win32Arduino source code is now moved to GitHub. Source code can be downloaded from the project’s GitHub page.
After implementing many arduino library, I realized that unit testing a library is harder than I though. Most of the time, the library does not even require advanced arduino functionalities and could be tested outside of the arduino platform.
The win32Arduino is a solution to this issue.
Keep reading win32Arduino: a win32 library that implements most arduino functions ?
The subversion application does not offer native support for identifying changes to subversion properties as easily as changes to files.
The purpose of this script is to allows a subversion user to find all revisions where a change to a specific property occurred. In other words, it’s a “show log for subversion properties“.
The following article is yet another library that I have written. libMIDI is a c++ library for generating single tone melodies (monolithic melodies) in MIDI format.
Keep reading libMIDI – A C++ open-source library for generating single tone melodies in MIDI format ?
| CH 1 | : | Throttle |
| CH 2 | : | Rudder |
| CH 3 | : | Ailerons |
| CH 4 | : | Elevator |
| CH 5 | : | Flight mode |
| CH 6 | : | ??? |
The following arduino library was written to use the findings found during the Mapping RC Transmitter PWM signal to actual transmitter values article. All results were wrapped into a library for ease of use.
The RcReceiverSignal is an arduino library that allows one to read a signal sent from a Remote Controlled (RC) receiver.
If you ever need to use an RC Transmitter & receiver for a personal project, an easy way to retrieve the signal is to connect the receiver to a micro-controller.
However, decoding the signal to get actual transmitter values is not as easy as it sounds. You need to know the correct encoding and searching on the internet about the subject gives erratic results.
Here is the full article that explains how to correctly map an RC Transmitter PWM signal to actual transmitter values.
Keep reading Mapping RC Transmitter PWM signal to actual transmitter values ?
Here is another arduino library that I have written.
As a desktop developer, I am not used to have memory (or even CPU) requirements as most developers will not look at memory consumption as an arduino developer would. Memory & CPU is cheap. If your application is struggling to run on today’s computer, it will run smoothly in 1-2 years.
As most arduino developers have faced, the amount of memory available on embedded devices is pretty limited. Having a way to save bits or our precious memory is interesting.
BitReader is an arduino library that allows one to read or write data as chunks of bits.
Keep reading BitReader – An arduino library for reading & writing data as chunks of bits ?
The following article is about my first Arduino library that I have written. NonBlockingRTTTL is a non-blocking arduino library for playing RTTTL data.
Keep reading NonBlockingRTTTL – A non-blocking arduino library for playing RTTTL melodies ?
end2end zone